E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Setting the SP Upper and Lower Limit Values Section 4-6
Parameters
4-6-2 Setting
Setting the Set Point Upper-limit Value
Operating Procedure Set Point Upper Limit = 1000
in-t 5
C
sl-h
1300.0
C
sl-h
1000.0
Input Type
Set Point
Upper-limit
Setting range
Upper limit value changed
Input type changed
Input setting range
Set point limiter
Upper limit
value changed
Set the set point upper and lower limits in the Set Point Upper Limit and Set
Point Lower Limit parameters in the initial setting level. In this example, it is
assumed that the input type is set to a K thermocouple with a temperature
range of −200.0 to 1300.0°C.
C
Set value Upper/lower limit values
Sensor upper/lower limit values
A
Set point
B
(Cannot be set.)
Set point
Set point
B
(Can be set.)
Symbol Parameter: level Description
sl-h
sl-l
Set Point Upper Limit: Initial setting level
Set Point Lower Limit: Initial setting level
−200.0 1300.0
Input setting range
Set point limiter
−100.0 1000.0
To limit the SP setting
To limit the SP setting
1. Press the O Key for at least three seconds to move from the operation
level to the initial setting level.
2. Select the Set Point Upper Limit parameter.
3. Use the U and D Keys to set the parameter to 1000.0.
101