E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Using the Simple Program Function Section 4-16
Initial Setting Level 3. Use the U Key to set the parameter to STOP.
140
ptrn
off
ptrn
stop
pbnk 7
pbnk 2
4. Press the M Key to select the Valid Program Bank parameter.
5. Use the U and D Keys to set 2.
6. Press the O Key for at least one second to move from the initial setting
level to the operation level.
Operation Level 7. Press the O Key to move from the operation level to the bank setting lev-
C
PV/SP
el.
25.0
100.0
Program Pattern
Bank setting level 8. The Display Bank Selection parameter will be displayed. The current
Display Bank
Selection
bank number will be displayed, so use the U and D Keys to select 0.
d.bnk 0
d.bnk 0
0.lsp
0.0
0.lsp
150.0
0.sok 1
0.sok 5
Bank 0 SP
Bank 0
Soak Time
Bank 0
0.wtb Wait band
off
0.wtb
3.0
9. Press the M Key to select the Bank 0 SP parameter.
10. Use the U and D Keys to set the parameter to 150.0.
11. Press the M Key to select the Bank 0 Soak Time parameter.
12. Use the U and D Keys to set the parameter to 5.
13. Press the M Key to select the Bank 0 Wait band parameter.
14. Use the U and D Keys to set the parameter to 3.0.
15. Press the M Key to select the Display Bank Selection parameter.