E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Auxiliary Output 1
Open in Alarm
Auxiliary Output 2
Open in Alarm
Auxiliary Output 3
Open in Alarm
Heater Burnout
Latch
Heater Burnout Hysteresis
sb1n N-O: Close in alarm
N-C: Open in alarm
n-o, n-c N-O None
sb2n N-O: Close in alarm
N-C: Open in alarm
n-o, n-c N-O None
sb3n N-O: Close in alarm
N-C: Open in alarm
n-o, n-c N-O None
hbl OFF, ON off, on OFF None
hbh 0.1 to 50.0 0.1 A
ST Stable Range st-b 0.1 to 3240.0 15.0 °C or °F
α alfa 0.00 to 1.00 0.65 None
AT Calculated Gain at-g 0.1 to 10.0 0.8 None
AT Hysteresis at-h Universal input: 0.1 to 3240.0 0.8 °C or °F
Analog input: 0.01 to 9.99 0.20 %FS
Limit Cycle MV
Amplitude
lcma 5.0 to 50.0 20.0 %
Input Digital Filter inf 0.0 to 999.9 0.0 Second
Additional PV Display
pvad OFF, ON off, on OFF None
MV Display o-dp OFF, ON off, on OFF None
Automatic Display ret OFF or 1 to 99 off, 1 to OFF Second
Return Time
99
Alarm 1 Latch a1lt OFF, ON off, on OFF None
Alarm 2 Latch a2lt OFF, ON off, on OFF None
Alarm 3 Latch a3lt OFF, ON off, on OFF None
Move to Protect
Level Time
prlt 1 to 30 3 Second
Input Error Output sero OFF, ON off, on OFF None
Cold junction Compensation
Method
cjc OFF, ON off, on ON None
MB Command Logic
Switching
rlrv OFF, ON off, on OFF None
PV Change Color colr Orange, Red, Green org, red,
grn
RED None
Red to Green: When ALM1 is
ON,
r-g
Green to Red: When ALM1 is
ON
g-r
Red to Green to Red
Within PV stable band:
Green
Outside stable band: Red
r-g.r
Green to Orange to Red
Within PV stable band:
Green
Outside stable band: Green,
Red
g-o.r
Orange to Green to Red
Within PV stable band:
Green
Outside stable band: Green,
Red
o-g.r
PV Stable Band pv-b Temperature input: 0.1 to
5.0 °C or °F
3240.0
(See note
1.)
Analog input: 0.01 to 99.99 5.00 %FS
Appendix
Parameters Characters Setting (monitor) value Display Default Unit Set value
323