E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Output Adjustment Functions Section 4-17
Operation Level
C
d.bnk 0
d.bnk 1
1.lsp
0.0
1.lsp
200.0
1.sok 1
0.sok
10
Display Bank
Selection
Bank 1 SP
Bank 1
Soak Time
Bank 1
1.wtb Wait band
off
1.wtb
5.0
PV/SP
25.0
100.0
4-17 Output Adjustment Functions
4-17-1 Output Limits
16. Use the U and D Keys to set the parameter to 1.
17. Press the M Key to select the Bank 1 SP parameter.
18. Use the U and D Keys to set the parameter to 200.0.
19. Press the M Key to select the Bank 1 Soak Time parameter.
20. Use the U and D Keys to set the parameter to 10.
21. Press the M Key to select the Bank 1 Wait band parameter.
22. Use the U and D Keys to set the parameter to 5.0.
23. Press the O Key to move from the bank setting level to the operation level.
Output limits can be set to control the output using the upper and lower
limits to the calculated MV.
The following MV takes priority over the MV limits.
Manual MV (See note.)
MV at stop
MV at PV error
141