E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Wiring Terminals Section 2-2
Control Output 1 Outputs are sent from terminals 1 and 2 with the E5CN-H and from pins 3
and 4 with the E5AN/EN-H. The following diagrams show the available
outputs and their internal equalizing circuits.
Relay
Relay
1
2
3
4
+v
+
1
L
GND 2
−
Voltage (for driving SSR)
SSR
3
4
The following table shows the specifications for each output type.
E5CN-H
E5AN/EN-H
E5CN-H
+v
+
3
L
GND 4
−
E53-Q4 (PNP)
E53-QN (PNP)
+v
+
1
L
2
−
Current
+
1
V L
2
−
Linear voltage
+v +
3
L
4
−
V
+
3
L
GND
4
−
E53-Q3 (NPN) E53-V34N
E53-V35N
E5AN/EN-H
+
3
mA L
4
−
E53-C3N
E53-C3DN
Output type Specifications
Relay 250 VAC, 3 A (resistive load), electrical durability: 100,000
operations
Voltage (for driving
SSR)
PNP type, 12 VDC ±15%, 21 mA (with short-circuit protection)
Current DC 4 to 20 mA/DC 0 to 20 mA, resistive load: 600 Ω max.
Resolution: Approx. 10,000
Linear voltage 0 to 10 VDC, resistive load: 1 kΩ max.
Resolution: Approx. 10,000
Output type Specifications
SSR 75 to 250 VAC, 1 A (See note.)
Relay (Position- 250 VAC 1 A (including inrush current)
proportionalmodels) Note The SSR output (control output 1 or control output 2) ratings are as
follows:
Rated load voltage: 75 to 250 VAC
Rated load current: 1 A (resistance load)
Use the load current within the derating curve.
A zero cross function is not supported.
31