E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

PID Setting Level Section 5-6
5-6 PID Setting Level
d.pid Display PID Selection
Function
Setting
See
216
Power ON
The PID setting level is used to make settings such as PID values for each
PID set and MV limit values. Move to a particular PID set from the Display PID
Set Selection parameter, which is displayed first in the PID setting level.
Adjustment
Operation Level
Level
Press the O Key
for at least 1 s.
PID Setting
Level
Bank Setting
Level
Temperature control
being performed.
This parameter is used to select the PID set for making the display settings.
This parameter selects the PID set for which the display settings are to be
made.
Up to eight sets (1 to 8) can be used. The following items registered in
each set: PID value, MV upper and lower limits, automatic selection range
upper limit, cooling coefficient, and LBA detection time.
Note The current PID set will be displayed. If you use the U and D Keys
to change the PID set, the monitor function will be canceled.
■ Related Parameters
Display PID Selection
d.pid PID1
1
d.pid
2
PID2
d.pid
3 PID3
Bank No. (operation level): Page 179
c
PID Setting Level
M
1.p
8.0
M
1.i
233.0
M
1.d
40.0
M
1.olh
105.0
M
1.oll
-5.0
M
c
1.aut
1320.0
M
1.csc
1.00
M
1.lba
0
M
Setting range Default
1 to 8 See note.
d.pid
8 PID8
c
M
8.p PID 8
8.0 Proportional Band
M
8.i PID 8 Integral Time
233.0
M
8.d PID 8 Derivative Time
40.0
M
8.olh
PID 8 MV Upper Limit
105.0
M
8.oll
PID 8 MV Lower Limit
-5.0
M
c 8.aut PID 8
1320.0 Automatic Selection
Range Upper Limit
M
8.csc
PID 8
1.00 Cooling Coefficient
M
8.lba PID 8
0 LBA Detection Time
M