E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Wiring Terminals Section 2-2
36
E5CN-H
SUB1
SUB2
E5AN/EN-H
ALM1, 2, 3 can be output to auxiliary output 1, 2, 3 or changed with the
advanced function setting level.
The relay specifications are as follows:
E5@N-H (SUB1, SUB2) SPST-NO, 250 VAC, 3 A
E5@N-H (SUB3) SPDT, 250 VAC, 3 A
Event Inputs The E5@N-H@@@B supports event inputs. When event inputs 1/2 are to
be used, connect to terminals 11 to 13, and when event inputs 3/4 are to
be used, connect to terminals 23 to 25.
11
12
13
EV1
EV2
E53-CN@B@N2
(for E5CN-H)
11
12
13
EV1
EV2
E53-AKB (for E5AN/EN-H)
SUB3
SUB2
SUB1
Use event inputs under the following conditions:
The outflow current is approximately 7 mA.
Contact inputON: 1 kΩ max., OFF: 100 kΩ min.
No-contact inputON: Residual voltage 1.5 V max.; OFF: Leakage current 0.1 mA
max.
Polarities during no-contact input are as follows:
11 −
12 +
13
EV1
EV2
+
Two Event Inputs:
E53-CN@B@N2
(for E5CN-H)
11
+
12 +
13 −
EV1
EV2
Two Event Inputs:
E5AN/EN-
H@B@M@-500
(for E5AN/EN-H)
11
12
13
+ 23
+ 24
− 25
EV1
EV2
23
24
25
E5AN-H/EN-H@B@M@-500
EV3
EV4
Two Additional Event Inputs:
E53-AKB in E5AN/EN-
H@B@M@-500
(for E5AN/EN-H)
EV3
EV4