E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Initial Setting Level Section 5-9
in-h Scaling Upper Limit The input type must be set for an
analog input.
in-l Scaling Lower limit
dp Decimal Point
Function
Setting
See
226
These parameters can be used when the input type is set for an analog
input.
When an analog input is used, scaling is performed. Set the upper limit in
the Scaling Upper Limit parameter and the lower limit in the Scaling Lower
Limit parameter.
The Decimal Point parameter specifies the decimal point position of
parameters (set point, etc.) whose unit is EU.
Scaling Upper Limit, Scaling Lower Limit
Parameter name Setting range Unit Default
Scaling Upper Limit Scaling lower limit + 1 to 32400 None 100
Scaling Lower Limit −19999 to scaling upper limit − 1 None 0
Decimal Point
Parameter name Setting range Default
Decimal Point 0 to 3 0
Set value Settings Example
0 0 digits past decimal point 12345
1 1 digits past decimal point 1234.5
2 2 digits past decimal point 123.45
3 3 digits past decimal point 12.345
■ Related Parameters
d-u Temperature Unit
Function
Setting
See
Input type (initial setting level): Page 224
Set the temperature input unit to either °C or °F.
Setting range Default
c: °C, f: °F c
■ Related Parameters
Input type (initial setting level): Page 224
The input type must be set for a temperature
input.