E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Setting the Width of MV Variation Section 4-19
Operation Level
C
25.0
100.0
Initial Setting Level 1. Press the O Key for at least three seconds to move from the operation
Input Type
level to the initial setting level.
in-t 5
cntl
pid
cntl
pid
st on
st
off
PV/SP
PID·ON/OFF
PID·ON/OFF
ST
ST
2. Select the PID ON/OFF parameter by pressing the M Key.
3. Use the U Key to select 2-PID control. (The default is PID.)
4. Press the M Key to select the ST parameter.
5. Press the D Key to select OFF.
Operation Level 6. Press the O Key for at least one second to move from the initial setting
C
PV/SP
25.0
100.0
level to the operation level.
Adjustment Level 7. Press the O Key to move from the operation level to the adjustment level.
l.adj
orl
0.0
orl
5.0
MV
Change
Rate Limit
MV
Change
Rate Limit
8. Press the M Key to select the MV Change Rate Limit parameter.
9. Use the U Key to set the parameter to 5.0.
Operation Level 10. Press the O Key to return to the operation level.
C
PV/SP
25.0
100.0
147