E5CNH E5AN-H E5EN-H Digital Controllers User's Manual - OMRON

Names of Parts Section 1-1
E5EN-H
1-1-2 Explanation of Indicators
No. 1 Display Displays the process value or parameter name.
Lights for approximately one second during startup.
No. 2 Display Displays the set point, parameter operation read value, or the variable input
value.
Lights for approximately one second during startup.
No. 3 Display
(E5AN/EN-H Only)
Operation Indicators
Operation
indicators
Temperature
unit
Operation
indicators
Mode Key
Level Key Down Key
No. 1 display
No. 2 display
Up Key
Infrared Communications
Light Receiver
Displays MV (valve opening), soak time remain, or bank number.
Lights for approximately one second during startup.
1,2,3... 1. SUB1 (Sub 1)
Lights when the function set for the Auxiliary Output 1 Assignment parameter
is ON.
SUB2 (Sub 2)
Lights when the function set for the Auxiliary Output 2 Assignment parameter
is ON.
SUB3 (Sub 3)
Lights when the function set for the Auxiliary Output 3 Assignment parameter
is ON.
2. HA (Heater Burnout, Heater Short Alarm, Heater Overcurrent Detection
Output Display)
Lights when a heater burnout, heater short alarm, or heater overcurrent
occurs.
3. OUT1 (Control Output 1)
Lights when the control output function assigned to control output 1 turns
ON. For a current output, however, OFF for a 0% output only.
With position-proportional models, OUT1 lights when the "open" output
turns ON.
Ir
No. 3 display
PF (Function (Auto/
Manual)) Key
3