14.11.2012 Views

SV-iS7 User Manual - Inverter Drive Supermarket

SV-iS7 User Manual - Inverter Drive Supermarket

SV-iS7 User Manual - Inverter Drive Supermarket

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 8 Applied Functions<br />

If 10.4mA is being input into I1, the frequency corresponding to 20mA is 60Hz, so the auxiliary speed A in the table<br />

below is 24Hz(=60[Hz]x((10.4[mA]-4[mA])/(20[mA]-4[mA])) or 40%(=100[%]x((10.4[mA]-4[mA])/(20 [mA]-4[mA])).<br />

Setting Type Final Command Frequency<br />

0 M[Hz]+(G[%]*A[Hz]) 30Hz(M) + (50%(G) x 24Hz(A)) = 42Hz<br />

1 M[Hz]*(G[%]*A[%]) 30Hz(M)x(50%(G)x40%(A))=6Hz<br />

2 M[Hz]/(G[%]*A[%]) 30Hz(M)/(50%(G)x40%(A))=150Hz<br />

3 M[Hz]+(M[Hz]*(G[%]*A[%])) 30Hz(M)+(30[Hz]x(50%(G)x40%(A)))=36Hz<br />

4 M[Hz]+G[%]*2*(A[%]-50[%])[Hz] 30Hz(M)+50%(G)x2x(40%(A)–50%)x60Hz=24Hz<br />

5 M[HZ]*(G[%]*2*(A[%]-50[%])) 30Hz(M)x(50%(G)x2x(40%(A)–50%))= -3Hz (reverse)<br />

6 M[HZ]/(G[%]*2*(A[%]-50[%])) 30Hz(M)/(50%(G)x2x(60%–40%))= -300Hz (reverse)<br />

7 M[HZ]+M[HZ]*G[%]*2*(A[%]-50[%]) 30Hz(M)+30Hz(M)x50%(G)x2x (40%(A)–50%)= 27Hz<br />

8.1.2 Jog operation (If you want Jog operation)<br />

8-4<br />

Operation is also available using the terminal block and the multi keys of the keypad.<br />

1) Jog Operation by Terminal Block 1<br />

Group Code No. Function Display Setting Display Setting Range Unit<br />

DRV<br />

11 JOG Frequency - 10.00 0.5~maximum frequency -<br />

12 JOG Acc Time - 20.00 0~600 Sec<br />

13 JOG Dec Time - 30.00 0~600 Sec<br />

IN 65~75 Px Define 6 JOG - -<br />

*Px : P1~P8, P9~P11 (Option)<br />

Select the jog frequency setting terminal from the multi-function terminals P1 ~ P11 and set the function of the appropriate<br />

terminal block of IN-65 ~ IN-75 at No. 6 JOG. If the jog terminal which has been set with the operating command input, the<br />

operating frequency moves to the jog frequency, which is described below.<br />

DRV-11 Jog Frequency (Jog Frequency) : sets the frequency necessary for jog operation. Jog operation is the highest<br />

in the priority order except the dwell operation. Therefore, during sequential operation, up-down operation and 3-wire<br />

operation at a certain speed, if the jog terminal is input, it operates at the jog frequency.<br />

DRV-12 JOG Acc Time, DRV-13 JOG Dec Time : the deceleration and acceleration time during shift to jog frequency.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!