SV-iS7 User Manual - Inverter Drive Supermarket

How to Launch Easy Start
Procedure Description
1 Set CNF-61 Easy Start On as Yes.
Select All in CNF-40 Parameter Init and initialize all the parameters of
2
the inverter.
When the power of the inverter is first Off/On, Easy Start gets started.
Through the following displays on the digital loader, set proper values.
(If you press ESC on the digital loader, you can immediately get out of
Easy Start)
- Start Easy Set : select Yes.
- CNF-01 Language Sel : select the language you want.
- DRV-14 Motor Capacity : select the capacity of the motor.
- BAS-11 Pole Number : select the pole number of the motor.
3
- BAS-15 Rated Volt : select the rated voltage of the motor.
- BAS-10 60/50Hz Sel : select the rated frequency of the motor.
- BAS-19 AC Input Volt : set the input voltage.
- DRV-06 Cmd Source : selects the operating command method.
- DRV-01 Cmd Frequency : select the operating frequency.
Now you come back to the monitoring display. The minimum
parameter to drive the motor having been set, the motor is operated by
the operating command method set in DRV-06.
8.1.33 Other Config (CNF) mode parameters
Chapter 8 Applied Functions
Group Code No. Function Display Initial Setting Display Unit
CNF
2 LCD Contrast - - -
10 Inv S/W Ver - x.xx -
11 Keypad S/W Ver - x.xx -
12 KPD Title Ver - x.xx -
30~32 Option-x Type - None -
42 Changed Para 0 View All
44 Erase All Trip 0 No -
60 Add Title Del 0 No -
62 WH Count Reset 0 No -
74 Fan Time - 00:00:00 -
75 Fan Time Rst 0 No -
CNF-2 LCD Contrast : can adjust the LCD brightness of the digital loader.
CNF-10 Inv S/W Ver, CNF-11 Keypad S/W Ver : can check the OS version of the inverter and digital loader.
CNF-12 KPD Title Ver : can check the title version of the digital loader.
CNF-30~32 Option-x Type : can check the type of the option board inserted in slots 1~3.
8-49