SV-iS7 User Manual - Inverter Drive Supermarket

Chapter 6 How to use Keypad
6.1.9 How to initialize parameter
You can initialize the parameter that has been changed by the user to the initial state at the time of delivery. Not only
the entire parameter but a group of the parameter mode can be selected and initialized.
6-22
MON T/K N STP 0.0A
CNF N STP 0.0A
00 Jump Code
9 CODE
01 language Sel
English
02 Inv S/W Ver
Version 1.00
CNF N STP 0.0A
31 Option-2 Type
None
32 Option-3 Type
None
40 Parameter Init
----- No ------
CNF N STP 0.0A
40 Parameter Init
------ No ------
1 All Groups
2 DRV
CNF N STP 0.0A
31 Option-2 Type
None
32 Option-3 Type
None
40 Parameter Init
----- No ------
- Monitor Mode is displayed.
- Shift to CNF by using Mode key.
- Shift to code 40 using Down key.
- Press PROG.
- Of the Parameter items to initialize, select All Groups and press
PROG.
- Initialization finished, you come back to the initialization selection
display.