SV-iS7 User Manual - Inverter Drive Supermarket

8.1.4 3-Wire operation (if you want operation using Push button)
Chapter 8 Applied Functions
Group Code No. Function Display Setting Display Setting Range Unit
DRV 06 Cmd Source 1 Fx/Rx - x 0~5 -
IN 65~75 Px Define 14 3-Wire 0~48 -
*Px : P1~P8, P9~P11 (Option)
This is the function of operation by saving (Latch) the input signals as follows.
Therefore, you can make simple configuration sequence circuit as shown below. For it to move, the minimum input time(t)
of the input terminal should continue for more than 1mSec. If forward and reverse operating commands are
simultaneously input, it stops.
Frequency
FX
RX
P8 (3-Wire)
t
Memorized
frequency
Output
frequency
P6(CLEAR)
P7 (UP)
Operation
command(FX)
P1 FX : IN-65
P2 RX : IN-66
P8
CM
3-Wire : IN-72
8-7