SV-iS7 User Manual - Inverter Drive Supermarket

3) How to use status display
Chapter 6 How to Use Keypad
The items displayed on the top right of the keypad are displayed in modes other than Monitor Mode as well. Thus if
you register a variable you are interested in the display, you can monitor it at any time regardless of the mode shift or
change.
MON T/K N STP 0.00Hz
CNF N STP 0.00Hz
20 Anytime Para
Output Current
21 Monitor Line-1
Frequency
22 Monitor Line-2
Output Current
MON T/K N STP 0.0A
- This is the initial display of Monitor Mode.
- At the time of product delivery, the status item displays frequency.
- Select the item to display in status display in code 20 of CNF.
- Select output current.
- The unit at the top of the display has changed from frequency to current.
- The status display now shows current in Monitor Mode as well.
6-19