SV-iS7 User Manual - Inverter Drive Supermarket

2) Mode Shift with User/Macro Mode and Trip Mode
Chapter 6 How to Use Keypad
If the user registers the user code or sets the macro function using the multi-function key, the User/Macro Mode will
be displayed unlike the mode shift at the time of the product delivery. In addition, in case of a trip during operation, the
Trip Mode will be displayed and the trip information will be saved in the trip mode as past history if you withdraw the
trip using RESET function. The mode shift in the two modes is as follows.
MON T/K N STP 0.00Hz
PAR DRV N STP 0.00Hz
00 Jump Code
9 CODE
01 Cmd Frequency
0.00 Hz
02 Cmd Torque
0.0 %
U&M USR N STP 0.00Hz
00 Jump Code
9 CODE
01 Cmd Frequency
0.00 Hz
02 Cmd Torque
0.0 %
TRP Last-1
00 Trip Name ( 1)
External Trip
01 Output Freq
0.00 Hz
02 Output Current
0.0 A
CNF N STP 0.00Hz
00 Jump Code
40 CODE
01 Language Sel
English
02 LCD Contrast
MON T/K N STP 0.00Hz
- Power on, a display emerges as shown on the left. The present mode is the
monitor mode.
- Press Mode key once.
- You have shifted to Parameter Mode.
- Press Mode key once.
- You have shifted to User/Macro Mode.
- Press Mode key once.
- You have shifted to Trip Mode.
- Press Mode key once.
- You have shifted to Config Mode.
- Press Mode key once.
- You come back to Monitor Mode.
6-9