SV-iS7 User Manual - Inverter Drive Supermarket

8.1.36 Traverse operation
Group Code No. Function Display Initial Setting Display Unit
01 App Mode 1 Traverse -
08 Trv Amplit % - 0.0 %
09 Trv Scramb % - 0.0 %
APP 10 Trv Acc Time - 2.0 Sec
11 Trv Dec Time - 3.0 Sec
12 Trv Offset Hi - 0.0 %
13 Trv Offset Lo - 0.0 %
IN
65~75
65~75
Px Define
Px Define
27
28
Trv Offset Lo
Trv Offset Hi
-
-
APP-01 App Mode : sets the application mode at No. 1 Traverse.
The functions necessary for traverse operation are displayed.
Chapter 8 Applied Functions
APP-08 Trv Amplit % : selects the magnitude of the traverse operating frequency in percentage on the basis of the
operating frequency.
Operation frequency*
TrvAmplit%
Trv . Amp Frequency =
100
APP-09 Trv Scramb % : selects the magnitude of the scramble operating frequency and the frequency jump as
shown below.
Trv.
Amp frequency*
(100-
TrvScramb%)
Trv . Scr frequency = Trv.
Amp frequency -
100
PP-10 Trv Acc Time, APP-11 Trv Dec Time : sets the Acc/Dec time of traverse operation.
APP-12 Trv Offset Hi: If you select and input No. 28 Trv Offset Hi among the multi-function input terminal functions,
operation is carried out at the frequency pattern that has increased by the value set at APP-12.
Operation frequency*
TrvOffsetHi
Trv . OffsetHi frequency =
100
APP-13 Trv Offset Lo : If you select and input No. 27 Trv Offset Lo among the multi-function input terminal
functions, operation is carried out at the frequency pattern that has decreased by the value set at APP-13.
Operation frequency*
TrvOffsetLo
Trv . OffsetLo frequency =
100
8-53