SV-iS7 User Manual - Inverter Drive Supermarket

6.1.6 Parameter setting
1) Parameter setting in monitor mode
Chapter 6 How to Use Keypad
You can set some parameters including frequency in Monitor Mode. The following is an example of frequency setting.
MON T/K N STP 0.00Hz
MON T/K N STP 0.00Hz
Frequency
0.00 Hz
MON T/K N STP 0.00Hz
Frequency
10.00 Hz
MON T/K N STP 0.00Hz
1
- Check whether the cursor is in frequency item and the 09 frequency
setting method in DRV is keypad.
- Press PROG.
- Detailed information of the item is displayed and the cursor flashed.
- You can shift to the desired place for frequency setting by using
Shift key.
- Set frequency at 10Hz using Up key.
- Press PROG.
- The desired frequency has been set at 10Hz.
6-15