SV-iS7 User Manual - Inverter Drive Supermarket

8.1.35 Auto sequence operation
Chapter 8 Applied Functions
Group Code No. Function Display Initial Setting Display Unit
APP 01 App Mode 4 Auto Sequenc -
65~75 Px Define 41 SEQ-1 -
65~75 Px Define 42 SEQ-2 -
IN 65~75 Px Define 43 Manual -
65~75 Px Define 44 Go Step -
65~75 Px Define 45 Hold Step -
OUT
31~32
33
Relay 1, 2
Q1 Define
20
21
Step Pulse
Seq Pulse
-
-
APP-01 App Mode : If you select No. 4 Auto Sequence, the auto sequence group(AUT) is displayed in the
parameter mode. you can set the type of the auto sequence, Acc/Dec time and frequency of each step and the
rotation direction.
IN-65~75 Px Define : Use the multi-function input terminal for auto sequence operation.
41 : SEQ-L, 42 : SEQ-M
The sequence type of the auto sequence operation is selected. Up to 2 sequence operations are available with
different data set for each. If the terminal selected as SEQ-1 is input, the operation is carried out with the data set in
sequence 1. If the terminal selected as SEQ-2 is input, the operation is carried out with the data set in sequence 2.
43 : Manual
If the terminal set as No. 43 Manual is input during stop in the auto sequence operation mode, the operating
command and frequency command respectively set in DRV06(Cmd Source) and DRV07(Freq Ref Src) will apply.
44 : Go Step
The auto sequence operating method is selected. If you select Auto-B in AUT-01 code, this is used as the command
of step shift.
45 : Hold Step
During operation with AUT-01 Auto Mode set at Auto-A, if Hold Step terminal is input, the last step can be maintained.
If you select No. 19 Step Pulse among the function items of OUT-31~33, the output signals are output in pulses
every time each step changes during auto sequence operation. The pulse width is 100mSec. If you select No. 20
Seq Pulse and the pulse is output at the last step where a cycle of sequence 1 or 2, the pulse width is 100mSec.
Group Code No. Function Display Initial Setting Display Unit
AUT
01 Auto Mode 0 Auto-A -
02 Auto Check - 0.08 Sec
04 Step Number - 8 -
10 Seq 1/1 Freq - 11.00 Hz
11 Seq 1/1 XcelT - 5.0 Sec
12 Seq 1/1 StedT - 5.0 Sec
13 Seq 1/1 Dir 1 Forward -
14 Seq 1/2 Freq - 21.00 Hz
Displayed repeatedly as the number of set steps
8-51