SV-iS7 User Manual - Inverter Drive Supermarket

Chapter 9 Monitor Functions
* WHour Counter: Describes for No.5 WHour Counter (electricity consumed by inverter) among the aforementioned
Monitor items. Electricity consumption is calculated with voltage and current, and it is accumulated the calculated
electricity every 1 second.
The way of Electricity consumption display is followed description.
1. Below 1000kW, the unit is kW and it is displayed like a 999.9 kW.
2. Between 1 ~ 99 MW, the unit is MW and it is displayed like a 99.99MWh.
3. Between 100 ~ 999 MW, the unit is MW and it is displayed like a 999.9 MWh.
4. Above 1000 MW, the unit is MW and it is displayed like a 9999 MWh and can be displayed to 65535 MW.
5. Above 65535 MW, it is initialized to 0 and the unit becomes to kW and displayed like 999.9 kW.
6. In case of CNF-62 WH Count Reset to YES, user can clear the electricity consumption.
3) Load Speed Display Selection
Mode Group
Code
No.
Function Display Initial Setting Unit
61 Load Spd Gain - 100.0 %
PAR ADV 62 Load Spd Scale 0 X 1 -
63 Load Spd Unit 0 rpm -
ADV-61 Load Spd Gain : selects No. 24 Load Speed among the monitor items described above and displays the
actual number of rotations by computing the gear ratio when the motor axis and load are connected by a belt and so
on.
ADV-62 Load Spd Scale : selects to what place of decimals to display No. 24 Load Speed among the monitor
items(x1~x0.0001).
ADV-63 Load Spd Unit : selects the unit of No. 24 Load Speed among the monitor items. selects one of
RPM(Revolution Per Minute) and MPM(Meter Per Minute).
For example, if the speed is 300 [mpm] at 800[rpm] and if you want to display the value, set ADV-61(Load Spd Gain)
at“375%”. In addition, if you want it to be displayed to the first place of the decimals, set ADV-63(Load Spd Scale) at
“X 0.1”. Now “300.0 mpm” is displayed on the keypad display instead of “800rpm” for No. 24 Load Speed.
4) Hz / Rpm Display Selection
Mode Group Code No.
Function
Display
Initial Setting Unit
PAR
DRV
BAS
21
11
Hz / Rpm Sel
Pole Number
0
-
Hz
4
-
-
DRV-21 Hz / Rpm Sel : can convert all the parameters of which the unit is Hz into RPM or reversely. The Pole
Number of BAS-11 is applied.
9-3