SV-iS7 User Manual - Inverter Drive Supermarket

Chapter 6 How to use Keypad
2) Key Functions
Section Buttons Key name Function Description
KEY
6-2
1. Cancel(ESC)
2. Move to Left
3. MODE selection
4.Reverse operation
LED
5. Reverse operation
6. Stop Indication LED
Mode Key - Change MODE
Program Key - Write, change and save data in parameter codes.
Up key
Down Key
Left/Right Key
Multi Function
Key
Cancel Key
- Used when writing data or move codes.
- Movement among groups.
- Movement of cursor in writing.
- Register Jog or User codes.
- In writing, it is possible to use saved data previously if
press this button before pressing Program Key.
- Move to first code when code moving is required in a
group.
- Move to Monitor mode when Mode moving.
Forward Key - Motor rotates Forward direction.
Reverse Key - Motor rotates Reverse direction.
Stop/Reset Key
14. Move to UP
- Stop Under operating.
- Trip release when a trip occurs.
13. PROGRAM set
12. Move to Right
11. Multi-Function
10. Move to down
9. Forward operation LED
8. Forward operation
7. STOP/RESET