SV-iS7 User Manual - Inverter Drive Supermarket

Chapter 8 Applied Functions
CNF-42 Changed Para: When setting as View Changed, changed parameter comparing to default value is
displayed.
CNF-44 Erase All Tip : deletes all the saved failure history.
CNF-60 Add Title Del : this is a function to set to enable added codes in previous version to display and operate
added functions when SW of inverter main body is updated with new coded. If you set this at Yes, extract the digital
loader from the main body and insert it again, the title of the digital loader is updated.
CNF-62 WH Count Reset : The accumulated electricity is cleared.
CNF-74 Fan Time, CNF-75 Fan Time Rst : displays the cumulative time for which the cooling fan has operated. If
you select Yes at CNF-75 Fan Time Rst, CNF-74 Fan Time is cleared.
8.1.34 Timer function
8-50
Group Code No. Function Display Initial Setting Display Unit
IN 65~75 Px Define 38 Timer In -
31~33 Relay1,2 / Q1 27 Timer Out -
OUT 55 TimerOn Delay - 3.00 Sec
56 TimerOff Delay - 1.00 Sec
This is the timer function of the multi-function input terminal. You can turn the multi-function output(relay included)
after a certain period of time.
IN-65~75 Px Define : Set the terminal to operate as the timer among multi-function input terminals at No. 38 Timer
In. If you input the set terminal, the output set as Timer Out becomes active after the period of time set in OUT-55
TimerOn Delay. If the multi-function input terminal is turned off, the multi-function output(or relay) is turned off after
the period of time set in OUT-56 TimerOff Delay.
Px(Timer In)
Q1(Timer Out)
Out-55
Out-56