SV-iS7 User Manual - Inverter Drive Supermarket

Chapter 8 Applied Functions
8-42
Code No. Function Display Description
28 M2-Stall Lev Stall level
29 M2-ETH 1min 1 minute electronic thermal incessant rated level
30 M2-ETH Cont Electronic thermal operation level
40 M2-LoadSpdGain Gain adjustment for load speed display
41 M2-LoadSpdScal Scale adjustment for load speed display
42 M2-LoadSpdUnit Unit adjustment for load speed display
Example: set as follows if you want to change to 3.7kW in previous 7.5kW motor by using P3 terminal with the
operation function of the second motor.
Croup Code No. Function Display Setting Display Unit
IN 67 P3 Define 26 2 nd Motor -
M2
8.1.23 By pass operation
06 M2-Capacity 3.7kW kW
08 Ctrl Mode 0 V/F -
Group Code No. Function Display Setting Display Unit
IN 65~75 Px Define 16 Exchange -
OUT
31~32 Relay1,2 17 Inverter Line -
33 Q1 Define 18 Comm Line -
The load operating by the inverter can be exchanged with common power supply or a reverse sequence motion
can be carried out.
IS7
iS7
Inverter
Motor
1
3.7kW
Motor
2
IN-65~75 Px Define : This is input when No. 15 Exchange is set and the motor is shifted from the inverter to the
common power source. If you want to shift the motor reversely, turn OFF the set terminal.
P3
7.5kW