SV-iS7 User Manual - Inverter Drive Supermarket

Chapter 6 How to use Keypad
6.1.5 Code(Function Item) shift
1) Code shift in monitor mode
If you press Up and Down keys where the cursor is, names of frequency and current, etc. will be displayed.
6-12
MON T/K N STP 0.00Hz
Frequency
0.00 Hz
MON T/K N STP 0.00Hz
Output Current
0.0 A
MON T/K N STP 0.00Hz
MON T/K N STP 0.00Hz
Output Voltage
0 V
MON T/K N STP 0.00Hz
MON T/K N STP 0.00Hz
Frequency
0.00 Hz
MON T/K N STP 0.00Hz
- Power on, a display emerges as shown on the left. The present mode is the
monitor mode.
- The cursor is at the front of Hz item.
- Press Down key.
- The output current is displayed in the second display item.
- Do not press any key for about 2 seconds after shift.
- The cursor shifts to the second display item after the output current display is
gone.
- Press Down key.
- The third display item displays the output voltage.
- Do not press any key for about 2 seconds after shift.
- The output voltage display gone, the cursor shifts to the third display item.
- Press Up key twice.
- The first item displays frequency.
- Frequency display gone, the cursor is in the first display item.