SV-iS7 User Manual - Inverter Drive Supermarket

6.1.7 Operating status monitoring
1) Using monitor mode
Chapter 6 How to Use Keypad
You can monitor 3 items at a time in Monitor Mode. Some items including frequency can be edited. Displayed items
can be selected by the user in Config Mode(CNF).
MON T/K N STP 0.00Hz
1
CNF N STP 0.00Hz
21 Monitor Line-1
Frequency
22 Monitor Line-2
Output Current
23 Monitor Line-3
Output Voltage
CNF N STP 0.00Hz
21 Monitor Line-1
Frequency
22 Monitor Line-2
Output Current
23 Monitor Line-3
Output Power
MON T/K N STP 0.00Hz
Hz
A
kW
- This is the initial display of Monitor Mode.
- The frequency, current and voltage are set as the default monitor items at the
time of product delivery.
- Of the displayed items, for frequency, the goal frequency is displayed during
stop and operating frequency during operation.
- You can set the items to display in Monitor Mode in sequence at 21~23 in CNF.
- Move to 23 using Down key.
- Change the 23 item in Monitor Mode to output power.
- The third displayed item in Monitor Mode has been changed to output power.
6-17