SV-iS7 User Manual - Inverter Drive Supermarket

Chapter 13 Table of Functions
70 0h1246 Acc Time-1
sequential
0~600[sec]
accelerating time 1
20.0 O 7-18 O O O X X
71 0h1247 Dec Time-1
sequential
0~600[sec]
decelerating time 1
20.0 O 7-18 O O O X X
72
Note7) 0h1248 Acc Time-2
sequential
0~600[sec]
accelerating time 2
30.0 O 7-18 O O O X X
73 0h1249 Dec Time-2
sequential
0~600[sec]
decelerating time 2
30.0 O 7-18 O O O X X
74 0h124A Acc Time-3
sequential
0~600[sec]
accelerating time 3
40.0 O 7-18 O O O X X
75 0h124B Dec Time-3
sequential
0~600[sec]
decelerating time 3
40.0 O 7-18 O O O X X
* The grey code refers to hidden code, emerging only in case of setting of the code.
Note 4)
BAS-24 is shown only when DRV-09 Control Mode is “Sensorless-2” or “Vector”.
Note 5)
BAS-41~48 is displayed only when it is set as “User V/F” even if there is only one BAS-07 or M2-V/F Patt(M2-25).
Note 6)
IN-65~75 is displayed only when it is set as “sequential”(Speed –L.M.H,X) even if there is only one multi-function input.
Note 7)
displayed only when it is set as “sequential Acc/Dec”(Xcel-L,M,H) even if there is only one IN-72~75 multi-function input
13-6