Rexroth Tightening System 350 System Documentation - Rhino ...

7 Data Services Tightening Technology | Bosch Rexroth AG 111/3167.2 Ethernet communicationThe following responses are possible:– The FTP test was successful. The file 'FTP_Test.txt' was written to the FTP server '10.6.195.120'in the directory ''.The file was written in the root directory.– The FTP test was successful. The file 'FTP_Test.txt' was written to the FTP server '10.6.195.120'in the directory 'tightening_srv'.The file was written into the indicated directory. If required, a new directory was created for the file.– Code: 0x01 FTP server 'server name' unknownAssignment of “name” to “IP address” is not possible: DNS not available/not indicated. “Computername” unknown within the network (not entered in host table, DNS could not assign the name to anIP number).– Code: 0x02 FTP Server 'server name' cannot be reachedThe computer is not connected to the network. The ping to the computer did not respond.– Code: 0x04 Connection to FTP server 'server name' could not be madeThe computer is in the network, but a connection to the server cannot be made. No FTP server isinstalled on the computer or the server has not been booted.– Code: 0x08 Wrong access ID for access to FTP server 'server name'Server login failed. Check the user name and password.– Code: 0x20 The path 'directory' could not be created on the FTP server 'server name'The server does not allow directories to be created. Assign access rights for files and directories.– Code 0x40 Error while saving the file 'file name'The server rejected the file. Overwriting an existing file on the server is forbidden, write authorizationto the server not assigned, or upload not enabled.– Wrong access ID for access to FTP server 'server name'An error occurred while transferring the data to the server or a negative acknowledgement was receivedfrom the server.– Code 0x100 Error while closing the connection with FTP server 'server name'FTP “Quit” or “Bye” failed. Data or control sockets to the server will not close.Diagnosis counterYou can perform a static analysis of the Ethernet connection in the menu under System test → Ethernetin the Ethernet diagnosis counter index card.Figure 7–15:Static analysis of the Ethernet connectionSystem 350 | 3 608 878 040/05.2008