Rexroth Tightening System 350 System Documentation - Rhino ...

More documents

Recommendations

Info

188/316 Bosch Rexroth AG | Tightening Technology 8 Basic Commissioning8.5 Operating the Compact SystemIM24VFigure 8–12:Parameter dialog IM24V⇒Click on Accept to take over this data in the configuration for the tightening channel in the BS350.IMserFigure 8–13:Parameter dialog IMserThe same settings as those for the RS232 interface X3C1 (page 184) are possible in the drop-down lists.⇒ Click on Accept to take over this data in the configuration for the tightening channel in the BS350.8.5.2.6 Sending/saving dataThe tightening channel configuration must be sent to the tightening controller. It can also be stored as afile on the PC (see page 177).System 350 | 3 608 878 040/05.2008
8 Basic Commissioning Tightening Technology | Bosch Rexroth AG 189/3168.5 Operating the Compact System8.5.3 Offline configurationIn addition to the online configuration, the BS350 permits channel configurations to be generated even ifno tightening channel is connected. This may be helpful if, for example, the channel configuration to begenerated is known before commissioning and can be done as preparatory work.To generate a new configuration file in offline mode⇒ Click on File → New → Tightening channel configuration in the BS350.When generating a channel configuration offline, all the electronic and mechanical components have tobe added to the configuration file manually.To add a component manually:⇒ Select the empty symbol field and then a permitted component in the component selection (seeFigure 8–14).NoteOnly those components permitted in the configuration sequence are highlighted for selection, those notallowed are grayed out! This ensures that the linked components in the configuration sequence are plausible.The global parameters are set in accordance with the online configuration (see page 183).Empty symbol fieldPermitted componentFigure 8–14:Offline configuration of a tightening channel8.5.4 Defining a tightening programThe configuration of the tightening channel can be stored as a file on the PC (see page 177). It must besent to the tightening controller before commissioning the tightening channel.NotePrograms from the machine capability examination are already included on the device on delivery. You canuse these programs as the basis for your own tightening programs.The tightening program coordinates the tightening process or sequence. It is divided into various tighteningsteps, where tightening parameters are set.System 350 | 3 608 878 040/05.2008
Page 1 and 2:
Rexroth Tightening System 350System
Page 3 and 4:
ContentsSchraubtechnik | Bosch Rexr
Page 5 and 6:
ContentsSchraubtechnik | Bosch Rexr
Page 7:
1 About This DocumentThis chapter c
Page 10 and 11:
10/316 Bosch Rexroth AG | Tightenin
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
F PAF KRF S38/316 Bosch Rexroth AG
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100/316 Bosch Rexroth AG | Tighteni
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139: 138/316 Bosch Rexroth AG | Tighteni
Page 174 and 175: OKNOK191781624FGC1C3C2CS351174/316
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
.270/316 Bosch Rexroth AG | Tighten
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316:
Bosch Rexroth AGElectric Drives and
show all

Rexroth Tightening System 350 System Documentation - Rhino ...

Create successful ePaper yourself

Delete template?

Save as template?