Rexroth Tightening System 350 System Documentation - Rhino ...

7 Data Services Tightening Technology | Bosch Rexroth AG 81/3167.1 Overview of the tightening results communicationTable 7–1: Quality codes and their meaningsQuality code Monitoring function NOK *All other monitoring functions Category1 – All OK System2 A+, OK All4 A-, OK All8 T+, OK All10 A+, T+, OK All12 A-, T+, OK All16 T-, OK All18 A+, T-, OK All20 A-, T-, OK All32 G+, OK All34 A+, G+, OK All36 A-, G+, OK All40 T+, G+, OK All42 A+, T+, G+, OK All44 A-, T+, G+, OK All48 T-, G+, OK All50 A+, T-, G+, OK All52 A-, T-, G+, OK All64 G-, OK All66 A+, G-, OK All68 A-, G-, OK All72 T+, G-, OK All74 A+, T+, G-, OK All76 A-, T+, G-, OK All80 T-, G-, OK All82 A+, T-, G-, OK All84 A-, T-, G-, OK All128 NOK OK/NOK System129 System error (fault) OK/NOK System130 Remove start signal ((C)Cw = 0) OK/NOK System130 Remove enable (En = 0) OK/NOK System131 Timeout sync/rework (t+Sync/RW) OK/NOK System131 Timeout application (t+app) OK/NOK System132 Synchronization (sync) OK/NOK System133 Rework (RW) OK/NOK System135 Spindle bypass (ByPass) OK/NOK System136 NOK step (max. NOK) OK/NOK System137 Redundancy torque (RedT) OK/NOK System138 Redundancy angle (RedA) OK/NOK System139 Start-up test (StartUp) OK/NOK System* A+, T+, G+ mean that the upper limit for the angle, torque, or gradient has been exceeded.A–, T–, G– mean that the lower limit for the angle, torque, or gradient has not been reached.System 350 | 3 608 878 040/05.2008