Rexroth Tightening System 350 System Documentation - Rhino ...

20/316 Bosch Rexroth AG | Tightening Technology 3 Important Operating Instructions3.1 Intended Use3.1 Intended Use3.1.1 IntroductionBosch Rexroth products are designed and manufactured using state-of-the-art technology. Before delivery,they are checked for operational safety.The products may only be used in the proper manner. When they are not used as intended, situations mayarise resulting in personal or material damage.NoteBosch Rexroth provides no warranty, assumes no liability and will not pay for any damages resulting fromdamage caused by products not being used as intended. Any risks resulting from the products not beingused as intended are the sole responsibility of the user.3.1.2 Areas of Application and UseBefore using the Bosch Rexroth products, the following prerequisites must be fulfilled to ensure that theyare used as intended:– Everyone who in any way deals with one of our products must read and understand the correspondingnotes regarding safety and regarding proper use.– If the products are hardware, they must be kept in their original state, i.e. no constructional modificationsmay be made. Software products may not be decompiled; their source codes may not be modified.– Damaged or improperly working products must not be installed or put into operation.– It must be ensured that the products are installed according to the corresponding regulations mentionedin the relevant documentation.The Rexroth tightening system is a system allowing performance, documentation and analysis of tighteningsbased on freely programmed processes.NoteFor areas of use and applications of the relevant component see also relevant documentation.NoteBosch Rexroth provides no warranty, assumes no liability and will not pay for any damages resulting fromimproper programming or configuration of the tightening system; any risks resulting form the programmingand configuration of the tightening system are the sole responsibility of the user.NoteOnly add-on units and accessories approved for Rexroth tightening systems may be used in Rexroth tighteningsystems. The attaching or installation of not approved components is not allowed. The same appliesfor cable and lines belonging to the Rexroth tightening system. Otherwise the functional and system safetywill be at risk.System 350 | 3 608 878 040/05.2008