Rexroth Tightening System 350 System Documentation - Rhino ...

7 Data Services Tightening Technology | Bosch Rexroth AG 93/3167.2 Ethernet communicationProtocolelementDescriptionStd Plus 310 Std 350TA– Lower limit for average torque X XTA+ Upper limit for average torque X XTAOS Torque threshold total angle monitoring X XTCh Tightening, upper X XTCh+ Upper limit for tightening, upper X XTCl Tightening, lower X XTCl– Lower limit for tightening, lower X XTP Target function Upper torque XTP& Target function Upper relative torque XTP&l Target function Lower relative torque XtP_ Target function Time XTPl Target function Lower torque XTRDifferential redundancy torque as a floating decimal number[Nm]TR+ Upper limit for differential redundancy torque X XTRT Torque threshold redundancy monitoring X XTSTS Torque threshold stick slip X XTTA Torque threshold angle X XTTAP Programmed torque threshold angle XTTG Torque threshold for gradient measurement X XYp Yield point X XYp+ Upper limit for yield point X XYpP Target function Yield point XXX* In the illustration in this document, the controller characters (LF, CR …) are portrayed as symbols that have theL Cexact width of one letter (e.g. F , R ). Thus, the character positions for the subsequent characters correspond in theillustration and printout.Results/measurement valuesTable 7–4: Illustration of the results values in the results filesProtocol element Description ApplicationZZZZZStandardPlus 310Floating decimal number with variable number of digits and a decimal*pointYYY Integer (here with 3 digits) * *b Capital letter * *zs Step line z/s “A” to “T” * *rr.k Card rack number rr; in Compact System: 0* *Channel number k; in Compact System: 1resGeneral results* *OK Results OK X XNOK Results not OK (also for different causes than T, A, G) X X**CS351 ** 10 characters reserved for hardware ID CS351 X XStandard350** Placeholder for the examples in these instructionsSystem 350 | 3 608 878 040/05.2008