Rexroth Tightening System 350 System Documentation - Rhino ...

252/316 Bosch Rexroth AG | Tightening Technology 10 Working with the System10.1 Settings in the BS350ExampleThe following location access authorizations are entered for a user:Country Location Plant Area Department Group Station1 D Munich II ZIP 3A F3A Cylhead2 D Hamburg II345678910Example (cont.)The entries (lines) have the following meanings:Line 1: All 7 administration levels have been entered. The user has access to tightening cells thatcorrespond to all entries in the location name.– Location name of tightening cells that the user may access:Country Location Plant Area Department Group StationD Munich II ZIP 3A F3A Cylhead– Location name of a tightening cell that the user may not access:Country Location Plant Area Department Group StationD Munich 3A F3A CylheadLine 2: Only three administration levels have been entered. The user has access to tightening cellsthat correspond to these three entries, i.e. all systems that are located in plant II in Hamburg (theentries “Area”, “Department”, “Group”, and “Station” are not taken into account [wildcard]).– Location name of tightening cells that the user may access:Country Location Plant Area Department Group StationD Hamburg IID Hamburg II ABC 57 7Lines 3 to 10: No entries have been made. The user has access to all tightening cells without anylocation names in the top administration level. The other sections are irrelevant.– Location names of tightening cells that the user may access:Country Location Plant Area Department Group StationBerlin 24 II PM AT AxisSystem 350 | 3 608 878 040/05.2008