Rexroth Tightening System 350 System Documentation - Rhino ...

More documents

Recommendations

Info

52/316 Bosch Rexroth AG | Tightening Technology 5 Construction Guidelines5.4 Compatibility with foreign mattersEach connection cable may also be used as an extension. Up to five connection cables can be pluggedin a row.CAUTIONDanger of injury due to high electric voltage and loss of functional and systemreliabilityIf the cables between the Compact System CS351E-D or CS351E-G and the ErgoSpin are too long,this may trigger the residual-current-operated protective device. This can affect the functional andsystem reliability of the tightening system.⇒ For 110/120 V operation, use cables with max. 15 meters in length.⇒ For 230 V operation, use cables with max. 25 meters in length.⇒ Lay the cables so that no one can trip over them.⇒ Observe the minimum bending radius of 130 mm.You can adjust the cable outlet on the right angle plug, e.g. to adapt it to your use. Observe the angle ofturn of the plug, as shown in the following figure.Figure 5–8:Cable outlet on the right angle plug5.4 Compatibility with foreign matters5.5 Planning assistanceAll Rexroth Tightening System components are developed and tested according to the state-of-the-arttechnology.As it is impossible to follow the continuing development of all materials (e.g. lubricants in machine tools)which may interact with our Tightening System components, it cannot be completely ruled out that anyreactions with the materials used by Bosch Rexroth might occur.For this reason, before using the respective material a compatibility test has to be carried out for new lubricants,cleaning agents etc. and our housings/our materials.Partserver is an Internet service that can be used to call up CAN data from many manufacturers. UsingPartserver you can e.g. call up the constructional drawings for hand-held nutrunners or other parts in theTightening System 350. In this manner, you can take over these parts in your CAD without having to redesignanything and put systems together with them.All CAD data from Bosch Rexroth is available free of charge. You can find the respective pages in theInternet at: http://www.boschrexroth.com/schraubtechnik under 3-D/CAD data.System 350 | 3 608 878 040/05.2008
5 Construction Guidelines Tightening Technology | Bosch Rexroth AG 53/3165.5 Planning assistanceNoteYou will receive the CAD data from Partserver as a ZIP archive via e-mail. With ZIP archives (e.g. verysmall ZIP archives), the receipt of the e-mail may be blocked by a firewall or other system. Please ensurethat you are able to receive ZIP archives of any size. Alternatively, you can also select additional file formatson the Partserver.System 350 | 3 608 878 040/05.2008
Page 1 and 2: Rexroth Tightening System 350System
Page 3 and 4: ContentsSchraubtechnik | Bosch Rexr
Page 5 and 6: ContentsSchraubtechnik | Bosch Rexr
Page 7: 1 About This DocumentThis chapter c
Page 10 and 11: 10/316 Bosch Rexroth AG | Tightenin
Page 38 and 39: F PAF KRF S38/316 Bosch Rexroth AG
Page 100 and 101: 100/316 Bosch Rexroth AG | Tighteni
Page 102 and 103:
102/316 Bosch Rexroth AG | Tighteni
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
OKNOK191781624FGC1C3C2CS351174/316
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
.270/316 Bosch Rexroth AG | Tighten
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316:
Bosch Rexroth AGElectric Drives and
show all

Rexroth Tightening System 350 System Documentation - Rhino ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?