Rexroth Tightening System 350 System Documentation - Rhino ...

272/316 Bosch Rexroth AG | Tightening Technology 10 Working with the System10.2 Settings with the TFT displayFigure 10–26: Graph menuIf Only NOK is selected, only graphs from NOK tightenings are output; if All is selected, the graphs fromall the tightenings are output (OK or NOK tightening cases). The displayed graph is permanently updated.Torque (T) over angle of turn (A) is output as the standard setting. The program number, step number ofthe last completed step, torque, angle of turn, overall time, and OK/NOK evaluation are output above thegraph.The >> and STOP buttons are shown on the right (Fig. 10–27).Figure 10–27: Graph, only NOKIf you select the >> button, a menu will open where you can change the graph type. Tred - t and Tred - Acan only be selected if configuring a redundancy transducer.The current graph is “frozen” if you select the STOP button, i.e. the graph is no longer updated.Graph memoryThe Graph memory menu item is divided into the sub-items Last NOK and Last graph (Fig. 10–28).System 350 | 3 608 878 040/05.2008