Rexroth Tightening System 350 System Documentation - Rhino ...

136/316 Bosch Rexroth AG | Tightening Technology 7 Data Services7.3 3964R communicationTable 7–26: Results (binary format)Rel. byte address Length Format Contents14 1 Int8 Second (0 to 59)15 1 Int8 Reserve (00 hex)16 64 String ID code80 4 Int32 Torque actual value84 4 Int32 Angle actual value88 4 Int32 Torque threshold actual value92 4 Int32 Gradient actual value96 4 Int32 Deviation torque actual value/redundancy value100 4 Int32 Deviation angle actual value/redundancy value104 4 Int32 Torque+ set value108 4 Int32 Torque- set value112 4 Int32 Angle+ set value116 4 Int32 Angle- set value120 4 Int32 Gradient+ set value124 4 Int32 Gradient- set value128 4 Int32 Redundancy torque set value132 4 Int32 Redundancy angle set valueTotal: 136 bytesTable 7–27: Results (ASCII format)Rel. byte address Length Format Contents0 4 ASCII Rack/slot no. (e.g. “10.4”)4 1 Int8 Tightening program no.5 1 Int8 Result (+1 = OK, –1 = NOK, 0 = invalid)6 1 Int8 Quality code7 1 ASCII Reserve (00 hex)8 3 ASCII Line/column of the results step (e.g. “3A”)11 1 ASCII Reserve (00 hex)12 4 ASCII Year16 2 ASCII Month18 2 ASCII Day20 2 ASCII Hour22 2 ASCII Minute24 2 ASCII Second26 64 String ID code90 8 ASCII Torque actual value98 8 ASCII Angle actual value106 8 ASCII Torque threshold actual value114 8 ASCII Gradient actual value122 8 ASCII Deviation torque actual value/redundancy value130 8 ASCII Deviation angle actual value/redundancy value138 8 ASCII Torque+ set value146 8 ASCII Torque- set value154 8 ASCII Angle+ set value162 8 ASCII Angle- set valueTotal: 202 bytesSystem 350 | 3 608 878 040/05.2008