Rexroth Tightening System 350 System Documentation - Rhino ...

7 Data Services Tightening Technology | Bosch Rexroth AG 151/3167.4 Profibus DP communication7.4.4.5 Tightening results from several steps in a tightening processResults output is normally done for the last completed step. In an OK case, this is usually the last step incolumn A. In an NOK case, this is the step that led to the tightening being stopped.It is additionally possible to identify 3 other steps as documentation steps. The results from these stepsare stored in a so-called docu buffer and provided for further processing.Identification of the steps for results outputIn this example, steps 2A to 4A are identified as docu steps ( symbol in step icon). Step 5A, the laststep, does not have to be identified as a docu step, as it is documented by default. Selection is done inStep characteristics under Save results. The selection Docu buffer 1–3 manages, on the one hand,the number of the already used documentation options and, on the other, order 1–3 also influences theorder in which the results are entered.NoteAssign the docu buffer according to the logical sequence in the tightening process.Figure 7–43:Identification of the steps for results output7.4.4.6 Configuration of the results outputThe results output can be configured flexibly. You can create your own individual results output using alist with result characteristics, result values, and system parameters.To set the results output:1. In the BS350 operating system, click on System → CS Profibus dataThe SE/CS Profibus DP data window will appear.System 350 | 3 608 878 040/05.2008