Rexroth Tightening System 350 System Documentation - Rhino ...

More documents

Recommendations

Info

228/316 Bosch Rexroth AG | Tightening Technology 9 Tightening Processes9.2 Tightening program stepsFigure 9–37:Jump step dialog9.2.5.1 Step name9.2.5.2 Jump targetThis entry determines the name of the auxiliary step.The line and column of the program run sequence in which the tightening process should be continuedare entered in these two fields.NoteThe jump target is not automatically displayed in the program run sequence once the data has been transferred.For a better overview, we recommend integrating the jump target in the step name.An error message will be output if an attempt is made to delete a step that has been defined as the jumptarget for a jump step. It is not possible to delete it. If the jump target is moved by inserting and deletingother steps, the jump target will be correspondingly adjusted.9.2.5.3 Accept valuesIf the Accept button is selected, the data is taken over in the tightening program. However, it only appliesafter the data has been sent to the controller!9.2.5.4 Explanation of the NOK branch step and jump stepIf the bolt tightening ( 3 , A) is evaluated as OK in Fig. 9–38, the tightening process will be ended withthe end step (5, A). If the bolt tightening is evaluated as NOK, the tightening process will be branched tothe NOK path (4, B). The bolt will be unscrewed with a loosening process (5, B). The jump step (6, B)prompts a continuation of the tightening process at the entered jump target 3, A, i.e. the tightening resultswill be reevaluated after the bolt has been retightened in the NOK branch step (depending on the numberof cycles).NoteA tightening can only be evaluated as OK after all NOK branch steps and rework steps have been completedas OK. Furthermore, the tightening must end in column A.System 350 | 3 608 878 040/05.2008
9 Tightening Processes Tightening Technology | Bosch Rexroth AG 229/3169.2 Tightening program stepsExampleNOK branch step with jump stepIf the number of cycles stipulated in the NOK branch step are exceeded, thetightening process will be ended for good with an NOK result in the end step(5, A).Figure 9–38:NOK branch with jump stepExampleNOK branch step without jump stepIf tightening step 2 ,A has been evaluated as NOK and the NOK branch stepworked through with an OK result for tightening steps 4, B and 5, B, the tighteningwill still be evaluated as NOK.Figure 9–39:NOK branch without jump stepSystem 350 | 3 608 878 040/05.2008
Page 1 and 2:
Rexroth Tightening System 350System
Page 3 and 4:
ContentsSchraubtechnik | Bosch Rexr
Page 5 and 6:
ContentsSchraubtechnik | Bosch Rexr
Page 7:
1 About This DocumentThis chapter c
Page 10 and 11:
10/316 Bosch Rexroth AG | Tightenin
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
F PAF KRF S38/316 Bosch Rexroth AG
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100/316 Bosch Rexroth AG | Tighteni
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
OKNOK191781624FGC1C3C2CS351174/316
Page 176 and 177:
Page 178 and 179: 178/316 Bosch Rexroth AG | Tighteni
Page 270 and 271: .270/316 Bosch Rexroth AG | Tighten
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316:
Bosch Rexroth AGElectric Drives and
show all

Rexroth Tightening System 350 System Documentation - Rhino ...

Create successful ePaper yourself

Delete template?

Save as template?