Rexroth Tightening System 350 System Documentation - Rhino ...

More documents

Recommendations

Info

246/316 Bosch Rexroth AG | Tightening Technology 10 Working with the System10.1 Settings in the BS35010.1 Settings in the BS350Prerequisite for installation of the BS350 is the Windows 2000 or Windows XP operating system and atleast Windows Installer 3.1. Installation under Windows NT is not possible.The BS350 operating system is delivered on a USB stick (hereinafter referred to as the “System Stick”).The user is guided through the installation with an installation program.NoteFurther information on system requirements can be found in the online help.10.1.1 Setting up multiple BS350 directories with “BS350 Start several times”If several tightening cells are to be managed from one PC workstation, the BS350 operating program canbe set up in such a manner that several instances can be run (also simultaneously). Two prerequisites arenecessary for this:– The directory structure, which contains the parameter files for each tightening cell, must be separatelycreated and managed for each tightening cell.– The operating program must be able to start several times” (see below).10.1.1.1 Installation of the BS350 with the option “Start several times”1. Install BS350 in accordance with the instructions of the installation program.2. In the BS350 V2.000 dialog settings, select the option Start several times.After the installation has been completed, the BS350 is installed in a directory(e.g. C:\Programs\Rexroth\BS350 V2.000).3. Rename the installation directory so that it is possible to clearly assign it to a tightening station.4. Copy the entire BS350 directory for each additional tightening cell. Name the directories in such amanner that they are clearly assigned to the respective tightening station.ExampleThe directory names for four tightening cells may be as follows:– BS350 V2.000 Station 0– BS350 V2.000 Station 1– BS350 V2.000 Station 2– BS350 V2.000 Station 35. Delete the BS350.exe file from all copies, but not from the originally installed version.6. Copy the link with the BS350.exe application to the desktop for each tightening cell. Take over thesame name assignments here as those used for the directories.7. Set the properties for each link:a. Right click on the link and open the Properties.b. Enter the directory for the respective tightening cell in the Start in field.The directory is e.g. C:\Programs\Rexroth\BS350 V2.000 Station 1.c. Check whether the BS350.exe file has been correctly entered in the Target field.This entry is e.g. C:\Programs\Rexroth\BS350 V2.000 Station 0\BS350.exe.Now a version of the operating system with the parameters associated with the tightening cell can bestarted via the respective link.System 350 | 3 608 878 040/05.2008
10 Working with the System Tightening Technology | Bosch Rexroth AG 247/31610.1 Settings in the BS35010.1.1.2 Subsequent entry of the “Start several times” option:1. Start the registration editora. Click on Start → Run.b. Enter regedit and click on OK.2. In the registration editor, open the section HKEY_LOCAL_MACHINE\SOFT-WARE\Rexroth\BS350\2.000.3. Change the entry RunMultiple to 1.4. Save the changed entry.The BS350 is now capable of multiple starts.5. Copy the program directory, as described in the previous section.10.1.1.3 Assigning the interfaces to the various tightening cellsThe PC can be connected to a tightening system via the USB interface.Using Ethernet, any number of tightening cells can be addressed from one Ethernet interface on the PC.The necessary entries of the IP addresses are stored in the program directory for each tightening cell andare automatically used during a start to set up the connection via the associated link.NoteThe necessary steps for setting up an Ethernet interface can be found in chapter “Initial operation of theEthernet connection” on page 107.10.1.2 Setting up the Ethernet interface on the PC and tightening system10.1.3 Full version and service packsBoth partners must be configured as Ethernet participants to set up the connection via Ethernet.For the PC, this is done via its operating system; this setting is made for the interface module via the configurationof the tightening channel in the BS350 operating system.Detailed information on configuring the Ethernet interface can be found under “Setting up the programminginterface” on page 175 and “Configuring the Ethernet connection” on page 107.The functions of many components in the tightening system are implemented via software. This includes:– CS351 Compact System– BS350 operating system– ErgoSpin ESA, ESV and ESM hand-held nutrunnersThis software (full version) has been created during product development and is available on the SystemStick.An additional program version is installed when a full version of the BS350 is installed. Old program versionsthat are no longer needed can be uninstalled (deleted) after the new version has been installed.Updates for the full version are also provided via the Internet as a part of product development.In general, there are two types of software updates:– Service packs for the BS350 always refer to a full version and also contain the changes carried outin the previous service packs. Service packs for the BS350 require an installation of the appropriatefull version, as the packs only add supplements to the installed full version.– In contrast, a service pack for a firmware completely replaces the previous firmware version.NoteService packs are provided in the Internet under http://www.schraubtechnik.com.10.1.3.1 Software and firmware version requirementsAll components are provided with installed firmware.System 350 | 3 608 878 040/05.2008
Page 1 and 2:
Rexroth Tightening System 350System
Page 3 and 4:
ContentsSchraubtechnik | Bosch Rexr
Page 5 and 6:
ContentsSchraubtechnik | Bosch Rexr
Page 7:
1 About This DocumentThis chapter c
Page 10 and 11:
10/316 Bosch Rexroth AG | Tightenin
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
F PAF KRF S38/316 Bosch Rexroth AG
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100/316 Bosch Rexroth AG | Tighteni
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
OKNOK191781624FGC1C3C2CS351174/316
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197: 196/316 Bosch Rexroth AG | Tighteni
Page 270 and 271: .270/316 Bosch Rexroth AG | Tighten
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316:
Bosch Rexroth AGElectric Drives and
show all

Rexroth Tightening System 350 System Documentation - Rhino ...

Create successful ePaper yourself

Delete template?

Save as template?