11.07.2015 Views

Rexroth Tightening System 350 System Documentation - Rhino ...

Rexroth Tightening System 350 System Documentation - Rhino ...

Rexroth Tightening System 350 System Documentation - Rhino ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

276/316 Bosch <strong>Rexroth</strong> AG | <strong>Tightening</strong> Technology 10 Working with the <strong>System</strong>10.2 Settings with the TFT displayThe following message will appear if the program or menu option has been exited before sending thechanged program:Figure 10–35: Query: Send programThe current program is sent with Send, the changes are not accepted with Discard, and the user returnsto the parameter dialog with Cancel.10.2.5.3 Representation of unitsThe representation of the units for torque and gradient is done in accordance with Table 10–3.Table 10–3: Units for torque and gradientTorqueNmFtlbInlbkpmkgmkgfmGradientNm/°Ftlb/°Inlb/°kpm/°kgm/°kgfm/°Units in accordance with Table 10–4 are used for additional values.Table 10–4: Further values and unitsValueUnitAngle °Yield point drop %Times or msSpeed rpm or %10.2.5.4 Entry limitsThe entered parameters are checked for their value ranges. Specified limits are used for this. If the valuerange is incorrect, an error message will be output and the data is not taken over.<strong>System</strong> <strong>350</strong> | 3 608 878 040/05.2008

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!