Rexroth Tightening System 350 System Documentation - Rhino ...

24/316 Bosch Rexroth AG | Tightening Technology 4 Safety Instructions for Rexroth Tightening Systems4.1 Basic Notes4.1 Basic Notes4.1.1 Use and Distribution of Safety InstructionsAll documents supplied must be read carefully prior to installation of any components and commissioningof the Rexroth tightening system. Read and understand these safety instructions and all user documentationprior to working with the Rexroth tightening system. If you do not have the user documentation forthe Rexroth tightening system, contact your responsible Bosch Rexroth sales representative. Ask forthese documents to be sent immediately to the person or persons responsible for the safe operation ofthe Rexroth tightening system.When selling, lending and/or distributing in any other way the Rexroth tightening system and its componentsthe present safety instructions must also be supplied in the corresponding user language.4.1.2 Instructions for UseWARNINGDanger of injuryImproper use of the Rexroth tightening system and its components and the failure to follow the safetyinstructions in this document or tampering with the product, including disabling of safety devices,may result in material damage, bodily harm, electric shock or even death!⇒ Observe the safety instructions!Read the following information prior to initial commissioning of the Rexroth tightening system and its componentsin order to avoid personal injuries and/or material damage. The present security instructions mustbe followed at any time.– The company Bosch Rexroth AG assumes no liability for damages as a cause of failure to observethe warning instructions in the present documentation and in the documentations of all componentsof the Rexroth tightening system.– Read the operating, maintenance and safety instructions in your language before commissioning themachine. If you find that you cannot completely understand the documentation for your product,please ask your supplier to clarify.– Proper and correct transport, storage, assembly and installation, as well as care in operation andmaintenance, are prerequisites for optimal and safe operation of the Rexroth tightening system.– Check the product for visible defects, for example cracks in the housing or missing screws orseals.– Before commissioning, make sure that all the connection gaskets and plugs are installed correctlyto ensure that they are leakproof and fluids and foreign bodies are prevented from penetrating theproduct.– Make sure that all electrical connections are either used or covered. Commission the product onlyif it is installed completely.– Only use Rexroth products within the performance range provided in the corresponding technicaldata.– Do not expose Rexroth products to any mechanical loads under any circumstances. Never useRexroth products as a handle or step. Do not place any objects on Rexroth products.– Only assign trained and qualified persons to work with Rexroth tightening systems:– Only persons who are trained and qualified for the use and operation of the device may work onthe Rexroth tightening system or within its proximity. Qualified persons refers to persons who havereceived sufficient training in the assembly, installation, and operation of the Rexroth tighteningsystem and its components and information on warnings and precautions according to thepresent documentation and the documentation of the respective component.– Furthermore, they must be trained, instructed and qualified to switch electrical circuits and deviceson and off in accordance with technical safety regulations, to ground them and to mark themSystem 350 | 3 608 878 040/05.2008