Rexroth Tightening System 350 System Documentation - Rhino ...

More documents

Recommendations

Info

192/316 Bosch Rexroth AG | Tightening Technology 8 Basic Commissioning8.5 Operating the Compact System6. Enter the following data:NoteThe following entered data has to be adapted to the respective tightening channel configuration. The max.speed, which can be read in the Spindle limits field in the configuration window of the tightening channel(see Figure 8–6), may not be exceeded.Name, e.g. LoosenTarget function, e.g. Angle, value: 200°Additional functions, e.g. Speed, value: -100 rpm.NoteAlways enter a negative speed value for counterclockwise rotation.7. Click on Accept to store this data in the tightening program.8.5.4.3 Sending/saving dataTightening programs have to be sent to the tightening controller before they can be used. They can alsobe stored as files on the PC (see section 8.4).8.5.5 Configuring the PLC assignment tableThe PLC assignment table defines the assignment of the control signals to the tightening controller'sphysical interfaces. The tightening controller can be integrated into a system sequence with these controlsignals. The following number of inputs and outputs are available on the interfaces:Table 8–2: Number of inputs and outputsSystem component Number of inputs/outputsErgoSpin 4/0IMpdp 16 to 64/16 to 64IM24V 10/13IMdev 16 to 64/16 to 64A maximum of 256 input and output signals can be used.With automatic channel configuration, the PLC assignment table is created in accordance with the defaultsettings when the Compact System is commissioned with the ErgoSpin. It can be loaded from the CompactSystem by selecting System → SE/CS PLC assignment table.NoteInformation on the PLC assignment table configuration can be found in the BS350 online help under SE/CS PLC assignment table.Send this default PLC assignment table to the tightening controller; it can also be stored as a file on thePC (see page 177).Note A detailed description of the control signals can be found in Chapter 6, “Control Signals” on page 55!8.5.6 Setting the time on the tightening controllerThe time on the tightening controller can be set if the controller is connected to the BS350.The time is logged, e.g. in the course of the tightening results output, enabling times to be assigned tothe tightening results data.NoteInformation on how to set the time can be found in the BS350 online help under System time.System 350 | 3 608 878 040/05.2008
8 Basic Commissioning Tightening Technology | Bosch Rexroth AG 193/3168.5 Operating the Compact System8.5.6.1 Synchronizing date and time with an external clockThe date and time can be manually set in the BS350. Additionally, the clock can be set automatically, viaa so-called timeserver. In this case, the clock is set to the timeserver clock whenever the system is bootedand periodically thereafter.To indicate a timeserver:1. In the BS350 operating system, click on System → Tightening channel configuration.2. Double click on the parameter field for the Compact System.The Rexroth BS350 Compact System parameter dialog will appear.Figure 8–17:Configuration of time synchronization with an NTP server3. Enter the name (or IP address) of the timeserver in the NTP server address field.4. Assign the synchronization interval in the Sync interval field.5. Click on Accept to accept the settings.8.5.7 Sequence testCAUTIONIncorrect fixingIncorrect fixing of the nutrunner or workpiece may lead to injuries and damage to the device.⇒ Make sure that the nutrunner and workpiece are fixed securely and tightly or that you have agood grip on the hand-held nutrunner before starting the sequence test!⇒ Follow the safety information in the “ErgoSpin” operating instructions, 3 609 929 965!8.5.7.1 Sequence test via the BS350The generated tightening programs can be started directly from the BS350 with a sequence test.To start the sequence test:1. Make sure that you are logged onto the tightening system (see page 176).2. Click on System test → Sequence test or .The control panel shown in Figure 8–18 will open.The sequence test is stopped by selecting this button again.BTB OK/NOKChannel selection Program selection System statusdisplaysButtonsFigure 8–18:Control panel in sequence test modeSystem 350 | 3 608 878 040/05.2008
Page 1 and 2:
Rexroth Tightening System 350System
Page 3 and 4:
ContentsSchraubtechnik | Bosch Rexr
Page 5 and 6:
ContentsSchraubtechnik | Bosch Rexr
Page 7:
1 About This DocumentThis chapter c
Page 10 and 11:
10/316 Bosch Rexroth AG | Tightenin
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
F PAF KRF S38/316 Bosch Rexroth AG
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100/316 Bosch Rexroth AG | Tighteni
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143: 142/316 Bosch Rexroth AG | Tighteni
Page 174 and 175: OKNOK191781624FGC1C3C2CS351174/316
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
.270/316 Bosch Rexroth AG | Tighten
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316:
Bosch Rexroth AGElectric Drives and
show all

Rexroth Tightening System 350 System Documentation - Rhino ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?