Rexroth Tightening System 350 System Documentation - Rhino ...

92/316 Bosch Rexroth AG | Tightening Technology 7 Data Services7.2 Ethernet communicationProtocolelementDescriptionStd Plus 310 Std 350DP Docu buffer number (DP) XFO_ Application number (0, 1, …, 48) X XG– Lower gradient limit [Nm/°] (floating decimal) X XG_ Results gradient as a floating decimal number [Nm/°] X XG+ Upper gradient limit [Nm/°] (floating decimal) X XGA Gradient average of the step X XGA– Lower limit for gradient average X XGA+ Upper limit for gradient average X XGP Target function Gradient XID code ID code limited to 14 characters for table output format X XK# “SYSTEM200 compatible” channel number, e.g. 1 X XL_ Consecutive no. of the tightening (1, 2, …, 9999999),12-digit with zeros at the frontN Programmed speed XP_ Program number (0, 1, …, 48) X XPri Serial number of the primary measurement transducer XQC_ Quality code X XQR_ Redundancy transducer identification (“0” = LT, “1” = Tran1, “2”= Tran2, “–1” = none)Red Serial number of the redundant measurement transducer XRES Tightening result X XS Step number of the results step in line [YY]/column [b] format X XSB Stopped by; index for switch-off criteria (1 … 35) X XSK Tightening step category (SK) XSpindle ID number of tightening spindle XSST_ Tightening position X XSTS Stick slip X XSTS+ Upper limit for stick slip X XT– Lower torque limit [Nm] (floating decimal) X XT& Relative torque of a step X XT&– Lower limit for relative torque X XT&+ Upper limit for relative torque X XT[ Torque range X XT[– Lower limit for torque range X XT[+ Upper limit for torque range X Xt_ Tightening time X Xt+ Tightening time limit X XT+ Upper torque limit [Nm] (floating decimal) X XT< Minimum torque of the step [Nm] (floating decimal) X XT Maximum torque of the step [Nm] (floating decimal) X XT>+ Upper limit for max. value X XTA Average torque of the step X XXXXXSystem 350 | 3 608 878 040/05.2008