Rexroth Tightening System 350 System Documentation - Rhino ...

8 Basic Commissioning Tightening Technology | Bosch Rexroth AG 173/3168.2 Assembling the tightening cell8.1.2 Overview of commissioning stepsAssembling the CS351 Compact System (see page 173)Assembling the hand-held nutrunner (see page 173)Connecting the hand-held nutrunner to the Compact System (see page 174)Switching on the tightening cell (see page 173)Connecting the PC (see page 174)Installing the BS350 operating system (see page 174)Starting the BS350, setting up the programming interface, password entry(see page 175) to (page 176)Configuring the tightening channel (see page 180) and (page 189)Configuring the PLC assignment table (see page 192)Defining the tightening program (see page 189)Sending/saving data (see page 177)Sequence test (see page 193)Operating the ErgoSpin hand-held nutrunner (see page 194)Figure 8–1:Overview of commissioning steps8.2 Assembling the tightening cell8.2.1 Assembling the CS351 Compact SystemNoteDetailed information on assembling and commissioning the CS351 Compact System can be found in the“CS351” operating instructions (3 609 929 B45).8.2.2 Assembling the ErgoSpin hand-held nutrunnerNoteDetailed information on assembling and commissioning the ErgoSpin hand-held nutrunner can be foundin the “ErgoSpin” operating instructions (3 609 929 965).System 350 | 3 608 878 040/05.2008