Rexroth Tightening System 350 System Documentation - Rhino ...

7 Data Services Tightening Technology | Bosch Rexroth AG 157/3167.5 Printer communication7.5 Printer communicationThe “Printer Communication” documentation describes the use of serial interfaces in the Tightening System350 for tightening results output on a printer or other receiving device (e.g. a computer with a terminalprogram, or similar).– Results output on printer (page 157)– Formats of the results output (page 159)– Chronological sequence of the tightening result data output process (page 161)– Error messages in connection with the results output via a printer (page 162)Examples of tightening systems with data output on a printerThe Compact System can directly output tightening results on a printer. The following figure shows atightening system with data output on a printer.(1)7.5.1 Results output on printerFigure 7–48: Compact system with hand-held nutrunners and results output on a printer (1)7.5.1.1 Configuration of the serial interface for results outputThe configuration of the necessary parameters takes place via the configuration of the interface. There,you can either configure the installed serial interface (X3C1) or an IMser interface module at slots B1 orB2.System 350 | 3 608 878 040/05.2008