Rexroth Tightening System 350 System Documentation - Rhino ...

10 Working with the System Tightening Technology | Bosch Rexroth AG 271/31610.2 Settings with the TFT displayFigure 10–24: Standard screenThe top line displays the switch-off criterion and respective value (here: target function Angle, 724.11°).The values for all the monitoring functions and counter readings 1) for the OK/NOK counter (if an OK/NOK counter is configured) can be scrolled through in the bottom line.Actual values 2The top line displays the switch-off criterion and respective value (here: target function Torque 2.07 Nm).The middle line shows the angle from the last results step (here: 261.75°). The following are alternatelyscrolled through in the bottom line:– The overall time for the tightening (tG) (here: 0.97 s)– The counter readings 1) for the OK/NOK counter (if an OK/NOK counter is configured)– The last entry in the error list (if there is a system error).If the angle or torque is too large or too small (NOK), and up or down arrow will be shown to the right ofthe measurement value (Fig. 10–25). The entire line will be displayed flashing in black and red.Figure 10–25: Actual values 2Graph This menu item is divided into the following sub-items (Fig. 10–26):– Only NOK– All1) Inverse display if the specified value is reached when counting forwards or zero is reached whencounting backwards.System 350 | 3 608 878 040/05.2008