Rexroth Tightening System 350 System Documentation - Rhino ...

44/316 Bosch Rexroth AG | Tightening Technology 5 Construction Guidelines5.2 Tightening system design5.2.4.1 Programming interfacesThe computer with the BS350 operating system can be connected via the following interfaces:InterfaceEthernetUSB (device)Implementation on deviceX7E1 on the base plate of the CS351 Compact SystemX3U3 on the front of the CS351 Compact System5.2.4.2 Controller interfacesThe following interface standards are available for transferring control signals:InterfaceParallel 24 V *Profibus DPDeviceNetLocation on deviceIM 24V module inserted at interface B1 or B2IMpdp module inserted at interface AIMdev module inserted at interface A* E.g. for connecting the program selector, socket tray, or start switch (see page 50)5.2.4.3 Results output interfacesThe CS351 Compact System has the following interfaces for communicating the tightening results:InterfaceRS232, serialLocation on deviceX3C1 on the base plate of the CS351 Compact System or IMser interface module,inserted at interface B1 or B2RS422, serialIMser interface module, inserted at interface B1 or B220 mA, serial IMser interface module, inserted at interface B1 or B2EthernetX7E1 on the base plate of the Compact SystemProfibus DPIMpdp module inserted at interface ADeviceNetIMdev module inserted at interface A5.2.5 DisplayDepending on the model, the CS351 Compact System is equipped with a TFT display (CS351E-G) oran LC display (CS351E-D).In the CS351E-D Compact System, an external monitor to display tightening results can be connectedvia the DVI interface XDVI (see 2–4 on page 14).5.2.5.1 Application optionsThe TFT display offers the following functions:– Tightening results display of results steps and docu steps– Graph output– Parameter changes in tightening programs– Program selection– Sequence tests– Setting up the OK/NOK counter– Language selection– Error list and error diagnosis– Acknowledgement of errors in error class 3System 350 | 3 608 878 040/05.2008