Rexroth Tightening System 350 System Documentation - Rhino ...

190/316 Bosch Rexroth AG | Tightening Technology 8 Basic Commissioning8.5 Operating the Compact SystemBasic commissioning is carried out with small-scale tightening programs. They consist of a:– Start step– Single tightening step– End stepNoteDetailed information on tightening steps and processes can be found under “Tightening Processes” onpage 201.The following describes how to generate programs for tightening and loosening a screw.8.5.4.1 Tightening program for tightening a screwThe tightening program for tightening a screw starts the tightening spindle clockwise. The following exampleshows all the steps this requires.To generate a new tightening program:1. Click on File → New → Tightening programs in the BS350.2. Select a program number, e.g. 1.3. Assign a name to the tightening program, such as Test by overwriting the existing program name n.a.(not available). (If program number 0 is selected, “n.a.” is not displayed).4. Select the end step and click on the symbol .A single tightening step is added before the end step (see Figure 8–15).Figure 8–15:Tightening program for the sequence testNoteThe following entered data has to be adapted to the respective tightening channel configuration. Spindleoverload and max. speed, which can be read in the Spindle limits field in the configuration window of thetightening channel (see Figure 8–6), may not be exceeded.System 350 | 3 608 878 040/05.2008