Rexroth Tightening System 350 System Documentation - Rhino ...

278/316 Bosch Rexroth AG | Tightening Technology 10 Working with the System10.2 Settings with the TFT display1 2 3 45Figure 10–38: Display: System testProgram selection list(1)The currently selected program is highlighted (Fig. 10–38). The available tightening programs can be selectedfrom the program selection list. Tap the desired program to select it; the actual values from the lasttightening will then be displayed (Fig. 10–39).Figure 10–39: System testStart button (3)Loosen button (2)The tightening program is started with the start button. The button is displayed inversely during the sequencetest. It is no longer inverted after the sequence has ended.Actuating the Loosen button will start the loosening program (program 99 (Ccw)), regardless of the selectedsequence program.The button is displayed inversely during the sequence test. It is no longer inverted after the sequence hasended.– The running program is prematurely stopped with the Stop button (4).– The Reset button (5) acknowledges class 3 errors.You can go back to the program list by tapping the program selection list (1).System 350 | 3 608 878 040/05.2008