Rexroth Tightening System 350 System Documentation - Rhino ...

302/316 Bosch Rexroth AG | Tightening Technology 10 Working with the System10.4 Results storage and statistics10.4.7.3 Value display index cardFigure 10–64: Value display index cardThe selected characteristics (Y-axis) are displayed as a function of the tightenings (X-axis) in 2 diagramson the Value display index card. Each tightening is represented as a dot (max. 50 dots). Monitoring limits(that were set in the tightening program) are represented in red in both diagrams and the selected interventionlimits are in green. A measurement value outside of the displayed Y-axis will be represented as ablue arrow that points in the direction of the imaginary position of the measurement value. If the resultsare continually updated, the most recent value from both diagrams will be represented with a dashed lineand numerically depicted under Results (on right).To show the result values for a measuring point, deactivate the continual update (inactive Update button)and click on a measuring point. The specific numerical values will be output in the Results group field(right side):– K: Channel number with information on the evaluation of the tightening (OK/NOK)– P: Program number with information on the tightening step and program column– Consecutive number of the selected value/data record– Selected characteristics with a numerical display of the values.The selected tightening is also highlighted in color on the Results index card.System 350 | 3 608 878 040/05.2008