Rexroth Tightening System 350 System Documentation - Rhino ...

8 Basic Commissioning Tightening Technology | Bosch Rexroth AG 189/3168.5 Operating the Compact System8.5.3 Offline configurationIn addition to the online configuration, the BS350 permits channel configurations to be generated even ifno tightening channel is connected. This may be helpful if, for example, the channel configuration to begenerated is known before commissioning and can be done as preparatory work.To generate a new configuration file in offline mode⇒ Click on File → New → Tightening channel configuration in the BS350.When generating a channel configuration offline, all the electronic and mechanical components have tobe added to the configuration file manually.To add a component manually:⇒ Select the empty symbol field and then a permitted component in the component selection (seeFigure 8–14).NoteOnly those components permitted in the configuration sequence are highlighted for selection, those notallowed are grayed out! This ensures that the linked components in the configuration sequence are plausible.The global parameters are set in accordance with the online configuration (see page 183).Empty symbol fieldPermitted componentFigure 8–14:Offline configuration of a tightening channel8.5.4 Defining a tightening programThe configuration of the tightening channel can be stored as a file on the PC (see page 177). It must besent to the tightening controller before commissioning the tightening channel.NotePrograms from the machine capability examination are already included on the device on delivery. You canuse these programs as the basis for your own tightening programs.The tightening program coordinates the tightening process or sequence. It is divided into various tighteningsteps, where tightening parameters are set.System 350 | 3 608 878 040/05.2008